News
TATECH 6 new features
- New optimized core, where the injection cycle timing is adjustable (injection stop)
- Automated idle control using idle air valve and also ignition
- Separate WB closed loop settings for idle and drive (1% resolution)
- Compensation parameters for air condition (injection, ignition, idle air valve)
- Pre-pressurize for fuel line (Adjustable time for fuel pump output)
- Wide Open Throttle (WOT) fuel and ignition map for MAP-sensor use
- Combined throttle position and manifold air pressure sensor function to use with boosted ITB engines
- Faster start with wasted spark in direct ignition engine ("dual-home" with adapter card)
- Alert lights for separate parameters (WBO, temperatures, knock, pressures etc.)
- Safety shut down from 2 pressure inputs (e.g. fuel and oil pressure)
- Fuel map protection lock feature
- Java Bluetooth-application for S60 (3rd edition) cell phone
- More options for digital outputs
- Fault code memory (user readable)
- Continuous Subaru AVCS control (by request)
List will be updated...
TATECH 32 (State-of-the-art ECU coming in spring 2008)
- 32 bit automotive ARM processor ECU
- Injection driver resolution down to 1us (8 separate drivers)
- Closed loop resolution from wide band lambda 0.1%
- Possibility to use several 16-bit PWM-output
- T6 ECU basic features
- More user defineable corection maps etc..
- Fully T5 ja T6 pin compatible
- And many more features to come
Ask for pre-order offer!
TATECH 4 and 5 firmware + PC UI updated 12/07 (versions 4.584 and 5.084)
- 3D fuel map marking from log
- PLX SM-AFR wbo support
- Optimized throttle pump features
- max RPM raised to 15000rpm
T5 Pro Upgrade -> T6 Pro
- See the firmware upgrade page (version 5.6XX)
- If your ECU HW is Rev17 or newer, you can utilize all T6 features
- If your ECU HW is Rev16 or older, you miss only the 3 x Pressure input features
- If your ECU HW is Rev15, the internal datalogger is missing. Upgrade for HW Rev16 is 100€
- HW Rev15 or 16 upgrade option to HW Rev 20 (T6) 300€
- NOTE: You can read the HW Revision information from ECU pressing Ctrl + R when online.
T4 Pro Upgrade -> T6 Pro
- T6 firmware compatibility upgrade for free when dyno-tuned in our facilities
- Note that the upgrade supports only for T4 ECU inputs and outputs (since T6 has more of them)
- Ask for offer to change your old T4 ECU to version T6 ECU!
